View SM5009CN2S_1310645.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SM5009 series
NIPPON PRECISION CIRCUITS INC.
Crystal Oscillator Module ICs
OVERVIEW
The SM5009 series are crystal oscillator module ICs, that incorporate circuits to limit oscillator-stage current, controlling total current consumption. High-frequency capacitors are built-in, eliminating the need for external components to make a stable fundamental-harmonic oscillator.
FEATURES
I I I I I I
Capacitors CG, CD built-in Standby function 6A typ (VDD = 5 V) low standby current (SM5009ALxS) Power-save pull-up resistor built-in (SM5009ALxS) Inverter amplifier feedback resistor built-in 16 mA (VDD = 4.5 V) drive capability (SM5009AKxS, ALxS, ANxS, CNxS)
I I I I I I I
4 mA (VDD = 4.5 V) drive capability (SM5009AHxS) Output three-state function 2.25 to 5.5 V supply voltage (CF5009ALx) 2.7 to 5.5 V supply voltage (SM5009AHxS, ALxS, ANxS, CNxS) Oscillator frequency output (fO, fO/2, fO/4, fO/8, fO/16, fO/32 determined by internal connection) 8-pin SOP (SM5009xxxS) Chip form (CF5009xxx)
SERIES CONFIGURATION
3V operating Version 1 , 2 Supply voltag e [V] 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 4.5 to 5.5 4.5 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 Output Output R e c o m m e n d e d frequency load operating (max) frequency [pF] rang e 3 [MHz] fO 15 16 fO /2 15 16 15 16 fO /4 fO /8 15 16 fO - - fO /2 - - 30 40 fO fO /2 30 40 30 40 fO /4 fO /8 30 40 fO /16 30 40 30 40 fO /32 fO 15 30 15 30 fO /2 fO 30 40 fO /2 30 40 30 40 fO /4 30 40 fO /8 fO /16 30 40 30 40 fO /32 5V operating Output R e c o m m e n d e d load operating (max) frequency [pF] rang e 4 [MHz] 15 30 15 30 15 30 15 30 15 40 15 40 50 40 50 40 50 40 50 40 50 40 50 40 50 30 50 30 50 40 50 40 50 40 50 40 50 40 50 40 Built-in capacitance CG [pF] 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 CD [pF] 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Input level TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL CMOS CMOS CMOS CMOS CMOS CMOS Output duty level CMOS CMOS CMOS CMOS TTL TTL CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS S t a n d by function No No No No No No No No No No No No No No Yes Yes Yes Yes Yes Yes
SM5009AH1S SM5009AH2S SM5009AH3S SM5009AH4S SM5009AK1S SM5009AK2S SM5009AN1S SM5009AN2S SM5009AN3S SM5009AN4S SM5009AN5S SM5009AN6S SM5009CN1S SM5009CN2S SM5009AL1S SM5009AL2S SM5009AL3S SM5009AL4S SM5009AL5S SM5009AL6S
1. Chip form devices have designation CF5009 xxx. 2. S M 5 0 0 9 A H xS: V D D = 4.5 to 5.5V S M 5 0 0 9 A K xS: Ta = -20 to +85 C 3. S M 5 0 0 9 A H xS , AN xS , AL xS: Ta = -20 to +80 C S M 5 0 0 9 C N xS: Ta = -10 to +70 C 4. S M 5 0 0 9 A N xS , AL xS: Ta = -20 to +80 C Note: Recommended operating frequency is not the guaranteed value but is measured using NPC's standard crystal.
ORDERING INFORMATION
D e vice S M 5 0 0 9 xxxS C F 5 0 0 9 xxx-1 P ackag e 8-pin SOP Chip form NIPPON PRECISION CIRCUITS--1
SM5009 series
PACKAGE DIMENSIONS
(Unit:mm) * 8-pin SOP
0.15 + 0.1
- 0.05
4.4 0.2
6.2 0.3
0.695typ 5.2 0.3 0.05 0.05
1.5
0.1
1.27 0.10 0.4 0.1 0.12 M
0.4 0.2
0 to 10
NIPPON PRECISION CIRCUITS--2
SM5009 series
PAD LAYOUT
(Unit:m)
PINOUT
(Top view)
VDD
Q
(920,1220)
Y
INH XT XT
1
8
VDD NC NC Q
(0,0)
INH XT XT VSS X
Chip size: 0.92 x 1.22 mm Chip thickness: 300 30 m Chip base: V D D level
PIN DESCRIPTION and PAD DIMENSIONS
Number 1 2 3 4 5 6 7 8 Name INH XT XT VSS Q NC NC VDD I/O I I O - O - - - Description Output state control input. High impedance when LOW . In the case of the S M 5 0 0 9 A L xS , the oscillator stops and Pow er-saving pull-up resistor built in. Amplifier input. Amplifier output. Ground Output. Output frequency (f O , fO /2, fO /4, fO /8, fO /16, f O /32) determined by internal connection No connection No connection Supply voltage Cr ystal oscillator connection pins. Cr ystal oscillator connected between XT and X T P ad dimensions [m] X 195 385 575 766 765 - - 162 Y 212 212 212 212 1062 - - 1062
BLOCK DIAGRAM
VDD VSS XT
CG Rf CD 1/2 1/2 1/2 1/2 1/2
XT Q
INH
HA5009
009
2 3 4
7 6 5
VSS
NIPPON PRECISION CIRCUITS--3
SM5009 series
SPECIFICATIONS
Absolute Maximum Ratings
VSS = 0 V
P arameter Supply voltage range Input voltage range Output voltage range Operating temperature range Storage temperature range Output current Pow er dissipation Symbol VDD V IN VOUT T opr T stg IO U T PD 8-pin SOP Chip form 8-pin SOP Condition Rating -0.5 to 7.0 -0.5 to V D D + 0.5 -0.5 to V D D + 0.5 -40 to 85 -65 to 150 -55 to 125 25 500 Unit V V V C C mA mW
Recommended Operating Conditions
VSS = 0 V
P arameter Symbol Series f 30MHz f 16MHz f 40MHz f 40MHz f 30MHz f 40MHz Chip form AL series 8-pin SOP Input voltage V IN All series AH series f 30MHz, 4.5V V D D 5.5V f 16MHz, 2.7V V D D 3.6V f 30MHz 30MHz < f 40MHz Chip form AN series 8-pin SOP Operating temperature TO P R CN series f 40MHz, 2.7V V D D < 4.5V f 40MHz, 4.5V V D D 5.5V f 40MHz, 2.7V V D D < 4.5V f 40MHz, 4.5V V D D 5.5V f 30MHz, 4.5V V D D 5.5V f 30MHz f 20MHz f 40MHz f 14.4MHz Condition Rating min 4.5 2.7 4.5 2.7 2.7 2.7 2.3 2.25 2.7 2.4 VSS - 40 - 20 - 40 - 20 - 20 - 40 - 20 - 20 - 40 - 10 - 40 - 40 - 20 - 20 - 20 - 40 - 20 typ - - - - - - - - - - - - - - - - - - - - - - - - - - - - max 5.5 3.3 5.5 5.5 5.5 5.5 2.7 2.75 5.5 2.7 VDD + 85 + 80 + 85 + 80 + 80 + 85 + 80 + 80 + 85 + 70 + 85 + 85 + 80 + 80 + 80 + 85 + 80 C C C V C C V Unit
AH series AK series AN series Supply voltage VDD CN series
V V V V
AK series
f 30MHz, 2.7V V D D < 4.5V f 30MHz, 4.5V V D D 5.5V Chip form f 40MHz, 2.7V V D D 5.5V f 30MHz, 2.3V V D D 2.7V f 20MHz, 2.25V V D D 2.75V f 40MHz, 2.7V V D D 5.5V 8-pin SOP f 30MHz, 2.7V V D D 5.5V f 14.4MHz, 2.4V V D D 2.7V
AL series
NIPPON PRECISION CIRCUITS--4
SM5009 series
Electrical Characteristics
5009AH series 3 V operation: VDD = 2.7 to 3.3 V, VSS = 0 V, Ta = -20 to 80 C unless otherwise noted.
Rating P arameter HIGH-level output voltage L O W -level output voltage Output leakage current HIGH-level input voltage L O W -level input voltage Symbol VOH VOL IZ V IH V IL Condition min Q: Measurement cct 1, I O H = 2 m A Q: Measurement cct 1, I O L = 2 m A Q: Measurement cct 2, I N H = L O W , V O H = V D D Q: Measurement cct 2, I N H = L O W , V O L = V S S INH INH SM5009AH1S CF5009AH1 I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 16 MHz cr ystal oscillator SM5009AH2S CF5009AH2 SM5009AH3S CF5009AH3 SM5009AH4S CF5009AH4 2.2 - - - 2.0 - - - typ - - - - - - 4.5 3 max - 0.4 10 A 10 - 0.3 10 7 mA - 1.5 3 V V V V Unit
Current consumption
ID D
I N H pull-up resistance Negative resistance Feedback resistance Built-in capacitance
RUP -R L Rf CG CD
Measurement cct 4, V D D = 3 V, I N H = V S S V D D = 3 V, Ta = 25 C , 16 M H z Measurement cct 5 Design value, determined by the internal wafer pattern
40 - 0.4 5.58 9.3
- -450 - 6 10
200 - 1.1 6.42 10.7
k M pF pF
5 V operation: VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter HIGH-level output voltage L O W -level output voltage Output leakage current HIGH-level input voltage L O W -level input voltage Symbol VOH VOL IZ V IH V IL Condition min Q: Measurement cct 1, I O H = 4 m A Q: Measurement cct 1, I O L = 4 m A Q: Measurement cct 2, I N H = L O W , V O H = V D D Q: Measurement cct 2, I N H = L O W , V O L = V S S INH INH SM5009AH1S CF5009AH1 I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 30 MHz cr ystal oscillator SM5009AH2S CF5009AH2 SM5009AH3S CF5009AH3 SM5009AH4S CF5009AH4 4.0 - - - 2.0 - - - typ - - - - - - 9 6 max - 0.4 10 A 10 - 0.8 20 13 mA - 4 9 V V V V Unit
Current consumption
ID D
I N H pull-up resistance Negative resistance Feedback resistance Built-in capacitance
RUP -R L Rf CG CD
Measurement cct 4, V D D = 5 V, I N H = V S S V D D = 5 V, Ta = 25 C , 30 M H z Measurement cct 5 Design value, determined by the internal wafer pattern
40 - 0.4 5.58 9.3
- -340 - 6 10
200 - 1.1 6.42 10.7
k M pF pF
NIPPON PRECISION CIRCUITS--5
SM5009 series 5009AK series VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter HIGH-level output voltage L O W -level output voltage Output leakage current HIGH-level input voltage L O W -level input voltage Symbol VOH VOL IZ V IH V IL Condition min Q: Measurement cct 1, I O H = 16 m A Q: Measurement cct 1, I O L = 16 m A Q: Measurement cct 2, I N H = L O W , V O H = V D D Q: Measurement cct 2, I N H = L O W , V O L = V S S INH INH SM5009AK1S Current consumption ID D I N H = open, Measurement cct 3, load cct 1, C L = 15 p F, 40 MHz cr ystal oscillator, Ta = -20 to +80 C Measurement cct 4, V D D = 5 V, I N H = V S S V D D = 5 V, Ta = 25 C , 40 M H z Measurement cct 5 Design value, determined by the internal wafer pattern 9.3 10 10.7 pF CF5009AK1 SM5009AK2S CF5009AK2 I N H pull-up resistance Negative resistance Feedback resistance Built-in capacitance RUP -R L Rf CG CD 4.0 - - - 2.0 - - - - - 40 - 0.4 5.58 typ - - - - - - 12 12 8 8 - -210 - 6 max - 0.4 10 A 10 - 0.8 26 26 mA 17 17 200 - 1.1 6.42 k M pF V V V V Unit
NIPPON PRECISION CIRCUITS--6
SM5009 series 5009AL series 3 V operation: VDD = 2.7 to 3.3 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter HIGH-level output voltage L O W -level output voltage Output leakage current HIGH-level input voltage L O W -level input voltage Symbol VOH VOL IZ V IH V IL Condition min Q: Measurement cct 1, I O H = 8 m A Q: Measurement cct 1, I O L = 8 m A Q: Measurement cct 2, I N H = L O W , V O H = V D D Q: Measurement cct 2, I N H = L O W , V O L = V S S INH INH CF5009AL1 CF5009AL2 I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 40 MHz cr ystal oscillator CF5009AL3 CF5009AL4 CF5009AL5 CF5009AL6 Current consumption ID D SM5009AL1S SM5009AL2S I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 40 MHz cr ystal oscillator, Ta = -20 to +80 C SM5009AL3S SM5009AL4S SM5009AL5S SM5009AL6S Standby current I N H pull-up resistance Negative resistance Feedback resistance Built-in capacitance IS T RUP1 RUP2 -R L Rf CG CD I N H = V S S , Measurement cct 3 Measurement cct 4, V D D = 3 V, I N H = V S S Measurement cct 4, V D D = 3 V, I N H = 2.1V V D D = 3 V, Ta = 25 C , 40 M H z Measurement cct 5 Design value, determined by the internal wafer pattern 9.3 10 10.7 pF 2.2 - - - 0.7V D D - - - - - - - - - - - - - - 0.6 40 - 0.4 5.58 typ - - - - - - 8 5 4 3 3 2 8 5 4 3 3 2 2 - - -200 - 6 max - 0.4 10 A 10 - 0.3V D D 17 11 9 7 6 5 mA 17 11 9 7 6 5 5 12 200 - 1.1 6.42 A M k M pF V V V V Unit
NIPPON PRECISION CIRCUITS--7
SM5009 series 5 V operation: VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter HIGH-level output voltage L O W -level output voltage Output leakage current HIGH-level input voltage L O W -level input voltage Symbol VOH VOL IZ V IH V IL Condition min Q: Measurement cct 1, I O H = 16 m A Q: Measurement cct 1, I O L = 16 m A Q: Measurement cct 2, I N H = L O W , V O H = V D D Q: Measurement cct 2, I N H = L O W , V O L = V S S INH INH CF5009AL1 CF5009AL2 I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 40 MHz cr ystal oscillator CF5009AL3 CF5009AL4 CF5009AL5 CF5009AL6 Current consumption ID D SM5009AL1S SM5009AL2S I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 40 MHz cr ystal oscillator, Ta = -20 to +80 C SM5009AL3S SM5009AL4S SM5009AL5S SM5009AL6S Standby current I N H pull-up resistance Negative resistance Feedback resistance Built-in capacitance IS T RUP1 RUP2 -R L Rf CG CD I N H = V S S , Measurement cct 3 Measurement cct 4, V D D = 5 V, I N H = V S S Measurement cct 4, V D D = 5 V, I N H = 3.5V V D D = 5 V, Ta = 25 C , 40 M H z Measurement cct 5 Design value, determined by the internal wafer pattern 9.3 10 10.7 pF 4.0 - - - 0.7V D D - - - - - - - - - - - - - - 0.3 40 - 0.4 5.58 typ - - - - - - 12 8 6 5 5 4 12 8 6 5 5 4 6 - - -400 - 6 max - 0.4 10 A 10 - 0.3V D D 26 17 13 11 10 9 mA 26 17 13 11 10 9 15 6 200 - 1.1 6.42 A M k M pF V V V V Unit
NIPPON PRECISION CIRCUITS--8
SM5009 series 5009AN/CN series 3 V operation: VDD = 2.7 to 3.3 V, VSS = 0 V, Ta = -20 to 80 C unless otherwise noted.
Rating P arameter Symbol Condition min S M 5 0 0 9 A N 1 S , CF5009AN1 S M 5 0 0 9 A N 2 S , CF5009AN2 HIGH-level output voltage VOH Q: Measurement cct 1, I O H = 8 m A SM5009AN3S, SM5009AN4S, SM5009AN5S, SM5009AN6S, SM5009CN1S, SM5009CN2S, CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 CF5009CN1 CF5009CN2 2.2 typ - max - Unit
V 2.1 - -
L O W -level output voltage Output leakage current HIGH-level input voltage L O W -level input voltage
VOL IZ V IH V IL
Q: Measurement cct 1, I O L = 8 m A Q: Measurement cct 2, I N H = L O W , V O H = V D D Q: Measurement cct 2, I N H = L O W , V O L = V S S INH INH S M 5 0 0 9 A N 1 S , CF5009AN1 S M 5 0 0 9 A N 2 S , CF5009AN2 I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 40 MHz cr ystal oscillator S M 5 0 0 9 A N 3 S , CF5009AN3 S M 5 0 0 9 A N 4 S , CF5009AN4 S M 5 0 0 9 A N 5 S , CF5009AN5 S M 5 0 0 9 A N 6 S , CF5009AN6 I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 30 MHz cr ystal oscillator, Ta = -10 to +70 C S M 5 0 0 9 C N 1 S , CF5009CN1 S M 5 0 0 9 C N 2 S , CF5009CN2
- - - 2.0 - - - - - - - - - 40 - 0.4 5.58
- - - - - 8 5 4 3 3 2 7 4 - -100 - 6 10
0.4 10
V A
10 - 0.3 17 11 9 7 6 5 15 9 200 - 1.1 6.42 10.7 k M pF pF mA V V
Current consumption
ID D
I N H pull-up resistance Negative resistance Feedback resistance Built-in capacitance
RUP -R L Rf CG CD
Measurement cct 4, V D D = 3 V, I N H = V S S V D D = 3 V, Ta = 25 C , 40 M H z Measurement cct 5 Design value, determined by the internal wafer pattern
9.3
NIPPON PRECISION CIRCUITS--9
SM5009 series 5 V operation: VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter Symbol Condition min S M 5 0 0 9 A N 1 S , CF5009AN1 S M 5 0 0 9 A N 2 S , CF5009AN2 HIGH-level output voltage VOH Q: Measurement cct 1, I O H = 16 m A SM5009AN3S, SM5009AN4S, SM5009AN5S, SM5009AN6S, SM5009CN1S, SM5009CN2S, CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 CF5009CN1 CF5009CN2 4.0 typ - max - Unit
V 3.9 - -
L O W -level output voltage Output leakage current HIGH-level input voltage L O W -level input voltage
VOL IZ V IH V IL
Q: Measurement cct 1, I O L = 16 m A Q: Measurement cct 2, I N H = L O W , V O H = V D D Q: Measurement cct 2, I N H = L O W , V O L = V S S INH INH CF5009AN1 CF5009AN2 I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 40 MHz cr ystal oscillator CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 SM5009AN1S
- - - 2.0 - - - - - - - - - - - - - - - 40 - 0.4 5.58
- - - - - 12 8 6 5 5 4 12 8 6 5 5 4 10 7 - -210 - 6 10
0.4 10
V A
10 - 0.8 26 17 13 11 10 9 26 17 13 11 10 9 22 15 200 - 1.1 6.42 10.7 k M pF pF mA V V
Current consumption
ID D I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 40 MHz cr ystal oscillator, Ta = -20 to +80 C
SM5009AN2S SM5009AN3S SM5009AN4S SM5009AN5S SM5009AN6S I N H = open, Measurement cct 3, load cct 2, C L = 15 p F, 30 MHz cr ystal oscillator S M 5 0 0 9 C N 1 S , CF5009CN1 S M 5 0 0 9 C N 2 S , CF5009CN2
I N H pull-up resistance Negative resistance Feedback resistance Built-in capacitance
RUP -R L Rf CG CD
Measurement cct 4, V D D = 5 V, I N H = V S S V D D = 5 V, Ta = 25 C , 40 M H z Measurement cct 5 Design value, determined by the internal wafer pattern
9.3
NIPPON PRECISION CIRCUITS--10
SM5009 series
Switching Characteristics
5009AH series 3 V operation: VDD = 2.7 to 3.3 V, VSS = 0 V, Ta = -20 to 80 C unless otherwise noted.
Rating P arameter Output rise time Output fall time Output duty cycle 1 Symbol tr1 tf1 Duty tP L Z tP Z L fm a x Condition min Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D , C L = 15 p F Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D , C L = 15 p F Measurement cct 3, load cct 2, Ta = 25 C , V D D = 3 V, C L = 15 p F Measurement cct 6, load cct 2, Ta = 25 C , V D D = 3 V, C L 15 p F Measurement cct 3 - - 45 - - 16 typ 6 6 - - - - max 18 18 55 100 100 - ns ns % ns ns MHz Unit
Output disable delay time Output enable delay time M a x i m um operating frequency
1. Determined by the lot monitor.
5 V operation: VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter Output rise time Output fall time Output duty cycle 1 Symbol tr1 tf1 Duty tP L Z tP Z L fm a x Condition min Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D , C L = 15 p F Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D , C L = 15 p F Measurement cct 3, load cct 2, Ta = 25 C , V D D = 5 V, C L = 15 p F Measurement cct 6, load cct 2, Ta = 25 C , V D D = 5 V, C L 15 p F Measurement cct 3 - - 45 - - 30 typ 4 4 - - - - max 12 12 55 100 100 - ns ns % ns ns MHz Unit
Output disable delay time Output enable delay time M a x i m um operating frequency
1. Determined by the lot monitor.
5009AK series VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter Output rise time Output fall time Output duty cycle 1 Symbol tr tf Duty tP L Z tP Z L fm a x Condition min Measurement cct 3, load cct 1, 0.4V to 2.4V, C L = 15 p F Measurement cct 3, load cct 1, 2.4V to 0.4V, C L = 15 p F Measurement cct 3, load cct 1, Ta = 25 C , V D D = 5 V, C L = 15 p F Measurement cct 6, load cct 1, Ta = 25 C , V D D = 5 V, C L 15 p F Ta = -20 to +80 C Ta = -40 to +85 C - - 45 - - 40 30 typ 2 2 - - - - - max 6 6 55 100 100 - MHz - ns ns % ns ns Unit
Output disable delay time Output enable delay time M a x i m um operating frequency
Measurement cct 3
1. Determined by the lot monitor.
NIPPON PRECISION CIRCUITS--11
SM5009 series 5009AL series 3 V operation: VDD = 2.7 to 3.3 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter Symbol Condition min Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D , C L = 15 p F tr1 Output rise time tr2 Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D , V D D = 2.3 to 2.7 V, Ta = -20 to +80 C , C L = 15 p F Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D , C L = 30 p F Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D , V D D = 2.3 to 2.7 V, Ta = -20 to +80 C , C L = 30 p F Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D , C L = 15 p F tf1 Output fall time tf2 Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D , V D D = 2.3 to 2.7 V, Ta = -20 to +80 C , C L = 15 p F Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D , C L = 30 p F Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D , V D D = 2.3 to 2.7 V, Ta = -20 to +80 C , C L = 30 p F Measurement cct 3, load cct 2, Ta = 25 C , V D D = 3 V, f 40 MHz, C L = 30 p F Output duty cycle 1 Duty Measurement cct 3, load cct 2, Ta = 25 C , V D D = 2.4 V, f 14.4 MHz, C L = 30 p F C F 5 0 0 9 A L x only, Measurement cct 3, load cct 2, Ta = 25 C , V D D = 2.5 V, f 30 MHz, C L = 15 p F Output disable delay time 2 Output enable delay time 2 tP L Z tP Z L Measurement cct 6, load cct 2, Ta = 25 C , V D D = 3 V, C L 15 p F CF5009ALx S M 5 0 0 9 A L xS S M 5 0 0 9 A L xS V D D = 2.4 to 2.7 V, S M 5 0 0 9 A L xS Measurement cct 3, Ta = -20 to +80 C V D D = 2.3 to 2.7 V, CF5009ALx V D D = 2.25 to 2.75 V, CF5009ALx - - - - - - - - 45 40 40 - - 40 30 40 14.4 30 20 typ 3.5 4 5 5.5 3.5 4 5 5.5 - - - - - - - - - - - max 9 13 ns 12 16 9 13 ns 12 16 55 60 60 100 100 - - - - - - MHz ns ns % Unit
Measurement cct 3 Measurement cct 3, Ta = -20 to +80 C M a x i m um operating frequency fm a x
1. Determined by the lot monitor. 2. Oscillator stop function is built-in. W h e n I N H goes LOW , normal output stops. W h e n I N H goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed.
NIPPON PRECISION CIRCUITS--12
SM5009 series 5 V operation: VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter Symbol tr1 Output rise time tr2 tr3 tf1 Output fall time tf2 tf3 Output duty cycle 1 time 2 time 2 Duty tP L Z tP Z L Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D Condition min C L = 15 p F C L = 30 p F C L = 50 p F C L = 15 p F C L = 30 p F C L = 50 p F Measurement cct 3, load cct 2, Ta = 25 C , V D D = 5 V, C L = 50 p F Measurement cct 6, load cct 2, Ta = 25 C , V D D = 5 V, C L 15 p F CF5009ALx S M 5 0 0 9 A L xS S M 5 0 0 9 A L xS - - - - - - 45 - - 40 30 40 typ 2 3.5 4 2 3.5 4 - - - - - - max 4 7 8 4 7 8 55 100 100 - - - MHz % ns ns ns ns Unit
Output disable delay Output enable delay M a x i m um operating frequency
Measurement cct 3 fm a x Measurement cct 3, Ta = -20 to +80 C
1. Determined by the lot monitor. 2. Oscillator stop function is built-in. W h e n I N H goes LOW , normal output stops. W h e n I N H goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed.
NIPPON PRECISION CIRCUITS--13
SM5009 series 5009AN/CN series 3 V operation: VDD = 2.7 to 3.3 V, VSS = 0 V, Ta = -20 to 80 C unless otherwise noted.
Rating P arameter Symbol Condition min S M 5 0 0 9 A N 1 S , CF5009AN1 S M 5 0 0 9 A N 2 S , CF5009AN2 tr1 Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D ,C L = 15 p F SM5009AN3S, SM5009AN4S, SM5009AN5S, SM5009AN6S, SM5009CN1S, SM5009CN2S, CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 CF5009CN1 CF5009CN2 - typ 3.5 max 9 Unit
-
5
13
Output rise time S M 5 0 0 9 A N 1 S , CF5009AN1 S M 5 0 0 9 A N 2 S , CF5009AN2 tr2 Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D ,C L = 30 p F SM5009AN3S, SM5009AN4S, SM5009AN5S, SM5009AN6S, SM5009CN1S, SM5009CN2S, CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 CF5009CN1 CF5009CN2 - 5 12
ns
-
7
16
S M 5 0 0 9 A N 1 S , CF5009AN1 S M 5 0 0 9 A N 2 S , CF5009AN2 tf1 Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D ,C L = 15 p F SM5009AN3S, SM5009AN4S, SM5009AN5S, SM5009AN6S, SM5009CN1S, SM5009CN2S, CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 CF5009CN1 CF5009CN2
-
3.5
9
-
5
13
Output fall time S M 5 0 0 9 A N 1 S , CF5009AN1 S M 5 0 0 9 A N 2 S , CF5009AN2 tf2 Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D ,C L = 30 p F SM5009AN3S, SM5009AN4S, SM5009AN5S, SM5009AN6S, SM5009CN1S, SM5009CN2S, CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 CF5009CN1 CF5009CN2 - 5 12
ns
-
7
16
Output duty cycle 1
Duty
Measurement cct 3, load cct 2, Ta = 25 C , V D D = 3 V
C L = 30 p F, S M 5 0 0 9 A N xS , CF5009ANx C L = 15 p F, S M 5 0 0 9 C N xS , CF5009CNx
45 40 - - 40 30
- - - - - -
55 % 60 100 100 - MHz - ns ns
Output disable delay time Output enable delay time M a x i m um operating frequency
tP L Z tP Z L fm a x
Measurement cct 6, load cct 2, Ta = 25 C , V D D = 3 V, C L 15 p F S M 5 0 0 9 A N xS , CF5009ANx Measurement cct 3 Ta = -10 to +70 C , S M 5 0 0 9 C N xS , CF5009CNx
1. Determined by the lot monitor.
NIPPON PRECISION CIRCUITS--14
SM5009 series 5 V operation: VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = -40 to 85 C unless otherwise noted.
Rating P arameter Symbol tr1 Output rise time tr2 tr3 tf1 Output fall time tf2 tf3 Output duty cycle 1 Duty tP L Z tP Z L fm a x Measurement cct 3, load cct 2, 0.9V D D to 0.1V D D Measurement cct 3, load cct 2, 0.1V D D to 0.9V D D Condition min C L = 15 p F C L = 30 p F C L = 50 p F C L = 15 p F C L = 30 p F C L = 50 p F Measurement cct 3, load cct 2, Ta = 25 C , V D D = 5 V, C L = 50 p F Measurement cct 6, load cct 2, Ta = 25 C , V D D = 5 V, C L 15 p F C F 5 0 0 9 A N x, S M 5 0 0 9 A N xS S M 5 0 0 9 C N xS , CF5009CNx - - - - - - 45 - - 40 30 typ 2 3.5 4 2 3.5 4 - - - - - max 4 7 8 4 7 8 55 100 100 - MHz - % ns ns ns ns Unit
Output disable delay time Output enable delay time M a x i m um operating frequency
Measurement cct 3
1. Determined by the lot monitor.
Current consumption and Output waveform with NPC's standard crystal
Cb
f (MHz) 30 40
R () 17.2 16.8
L (mH) 4.36 2.90
Ca (fF) 6.46 5.47
Cb (pF) 2.26 2.08
L
Ca
R
FUNCTIONAL DESCRIPTION
Standby Function
AH, AK, AN, CN series When INH goes LOW, the output on Q becomes high impedance, but internally the oscillator does not stop. AL series When INH goes LOW, the oscillator stops and the oscillator output on Q becomes high impedance.
Version AH, AK, AN, CN series LOW HIGH (or open) AL series LOW INH HIGH (or open) Q A n y f O , fO /2, fO /4, fO /8, fO /16 or f O /32 output frequency High impedance A n y f O , fO /2, fO /4, fO /8, fO /16 or f O /32 output frequency High impedance Oscillator Nor mal operation Nor mal operation Nor mal operation Stopped
Power-save Pull-up Resistance (AL series only)
The INH pull-up resistance changes in response to the input level (HIGH or LOW). When INH goes LOW (standby state), the pull-up resistance becomes large to reduce the current consumption during standby.
NIPPON PRECISION CIRCUITS--15
SM5009 series
MEASUREMENT CIRCUITS
Measurement cct 1
When measuring VOL
VDD R3 Q VSS
Measurement cct 4
3.0V or 5.0V VDD RUP = RUP1
When measuring VOH
VDD 0V VDD VOH 0V VDD VOL 0V R2
Signal Generator
R1
XT
VDD IPR
(VIL = 0V)
VSS
INH
V
VIH VIL
XT input waveform (10MHz)
RUP2 = VDD VIH IPR VIH : 2.1V(V DD = 3.0V) VIH : 3.5V(V DD = 5.0V) IPR
Q output
A
Q output
* 5 0 0 9 A K x, ALx, AN1, AN2 R1 : 50 R2 : 250(V D D = 4.5V), 275(V D D = 2.7V) R3 : 256(V D D = 4.5V), 288(V D D = 2.7V) * 5009AN3 to AN6, CNx R1 : 50 R2 : 245(V D D = 4.5V), 262(V D D = 2.7V) R3 : 256(V D D = 4.5V), 288(V D D = 2.7V) * 5009AHx R1 : 50 R2 : 1000(V D D = 4.5V), 1100(V D D = 2.7V) R3 : 1025(V D D = 4.5V), 1150(V D D = 2.7V)
Measurement cct 5
VDD XT Rf = XT VSS VDD IRf
Measurement cct 2
IRf IZ VDD Q VSS IZ
A
A
Measurement cct 6
V
VOH VOL
VDD
Signal Generator
XT VSS
Q INH
Measurement cct 3
IDD IST
R1
A
XT X'tal XT INH VDD
Q VSS
R1 : 50
NIPPON PRECISION CIRCUITS--16
SM5009 series
Load cct 1
Load cct 2
R Q output CL
(Including proove capacitance)
Q output CL
(Including probe capacitance)
C L = 15pF : DUTY , ID D , tr , tf R = 400
C L = 15pF : DUTY , ID D , tr1 , tf1 C L = 30pF : tr2 , tf2 C L = 50pF : tr3 , tf3
Switching Time Measurement Waveform
Output duty level (CMOS)
Q output
0.9VDD 0.1VDD TW
0.9VDD 0.1VDD
DUTY measurement voltage (0.5V DD)
tr
Output duty level (TTL)
tf
Q output
2.4V 0.4V TW
2.4V 0.4V
DUTY measurement voltage (1.4V )
tr
Output duty cycle (CMOS)
tf
Q output
TW T
DUTY measurement voltage (0.5VDD) DUTY= TW/ T 100 (%)
Output duty cycle (TTL)
Q output
TW T
DUTY measurement voltage (1.4V) DUTY= TW/ T 100 (%)
NIPPON PRECISION CIRCUITS--17
SM5009 series
Output Enable/Disable Delay
INH
VIL
VIH
tPLZ Q output
INH input waveform
tPZL
tr = tf
10ns
Note (AL series only) : when the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
NIPPON PRECISION CIRCUITS INC. reserves the right to make changes to the products described in this data sheet in order to improve the design or performance and to supply the best possible products. Nippon Precision Circuits Inc. assumes no responsibility for the use of any circuits shown in this data sheet, conveys no license under any patent or other rights, and makes no claim that the circuits are free from patent infringement. Applications for any devices shown in this data sheet are for illustration only and Nippon Precision Circuits Inc. makes no claim or warranty that such applications will be suitable for the use specified without further testing or modification. The products described in this data sheet are not intended to use for the apparatus which influence human lives due to the failure or malfunction of the products. Customers are requested to comply with applicable laws and regulations in effect now and hereinafter, including compliance with expor t controls on the distribution or dissemination of the products. Customers shall not expor t, directly or indirectly, any products without first obtaining required licenses and approvals from appropriate government agencies. NIPPON PRECISION CIRCUITS INC. 4-3, Fukuzumi 2-chome Koto-ku, Tokyo 135-8430, Japan Telephone: 03-3642-6661 Facsimile: 03-3642-6698 NC9801FE 2000.09
NIPPON PRECISION CIRCUITS INC.
NIPPON PRECISION CIRCUITS--18

▲Up To Search▲

Price & Availability of SM5009CN2S

	To Download SM5009CN2S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .